Huawei P8 Lite 2017 PRA-LA1 Firmware Stock ROM Flash File

Huawei P8 Lite 2017 PRA-LA1 Firmware

You’ve come to the right place if you want to find the Huawei PRA-LA1 Firmware. your device has bricked, lagging, or shuttering performance, unrooting it or bypassing the FRP lock can be accomplished with the use of this firmware. This phone 3/4GB of RAM, a 3000mAh battery, a Kirin 655 processor, and an IPS LCD screen. If you have the most up-to-date version of your flash tool, try installing the following file.

The stock version is the factory software that came with your phone. The PRA-LA1 Firmware works well and has no bugs. Problems with how well the camera works can be fixed quickly by updating the Huawei PRA-LA1 Flash File for phones and tablets. Because Android can be changed in so many ways, soft bricks, boot loops, and delay can all happen. This guide is what you need.

Also Read
Huawei PPA-LX2 Downgrade File For FRP Bypass
Huawei MRD-LX1F Firmware Dead Boot Repair SP Flash Tool

Stock-ROM Value

Stock ROM is the name for the operating system that is already on the phone when you buy it from a store. Most of the time, a person moves on from the stock software when he wants to add custom ROMs or make other changes to his device. But if something goes wrong while making a change, the only way to fix the problem is to go back to the stock ROM.


  • Unbrick your Huawei P8 Lite 2017 by flashing the factory image.
  • Fix the device boot loop issue.
  • You may upgrade and downgrade the software on the device.
  • To Reset or Remove FRP on your smartphone.
  • Fix any difficulties with the device, including any lag or stuttering.

If not done correctly, manually modifying the phone’s Stock firmware might render the device inoperable. Always keep a backup of your data, and make sure to follow all of the instructions.


  • This will only work with the PRA-LA1.
  • Your battery must have at least 30 percent of its life left before you can use your device.
  • You’ll need a good USB data cable and PC or laptop.
  • Make sure to take a backup of your device data.
  • we recommend that readers create a full backup of the device’s data.
  • Download the Update Huawei Multi-Download Tool.
  • Install the latest USB drivers for Huawei on your PC.

Download Huawei PRA-LA1 Firmware Stock ROM

Here is a direct download link if you’re seeking for the Huawei PRA-LA1 Flash File. Make sure the USB driver is installed as well.

Download LinkSoftware Details
Google DrivePra-LA1 C185B220 Official Firmware Prague-L21HN

How to Install Firmware on Huawei PRA-LA1

Follow these steps to set up your android phone using the Stock firmware that came with it originally. You may use the original firmware to restore your device to its factory settings by doing the following: Let’s give it a go.

  • First You need an SD card with at least 16GB of storage space.
  • Download the original firmware that came with your phone.
  • Make a new folder on your SD card, and call it dload once you give it that name.
  • After downloading the file, you will need to extract it and then enter an SD card into your device.
  • Now press volume up + volume down and power button then keep pressing all together.
  • Your phone will detect the package and will start the process automatically.
  • Be patient as the first boot might take up to five minutes to complete.
  • It is now necessary for you to do a Hard reset on your Huawei smartphone.
  • Keep pressing and holding the Volume Up button as well as the Power button until you see the Huawei logo.
  • By using the Volume buttons, Page may choose to delete all data and do a factory reset during the Hard reset.
  • and be sure to confirm by pressing the Power button.
  • The next step is to just wait till the procedure is finished completely.

I hope you were able to safely install the Huawei PRA-LA1 Firmware. If you could rate this page, that would be great.

Leave a Comment