Huawei Y5P DRA-LX9 Firmware (Stock ROM) Flash File

Huawei Y5P DRA-LX9 Firmware

If you want Huawei DRA-LX9 firmware, you’ve come to the right place. You can download the latest stock ROM from this website. This file is helpful if your smartphone is broken, slow, bricked, having shuttering problems, or if you accidentally locked yourself out of it. This phone has an IPS LCD screen, a 3020mAh battery, 2GB RAM, and a Helio P22 processor.

Your smartphone’s factory software is the stock firmware. The DRA-LX9 stock firmware is reliable and error-free. Updating the DRA-LX9 Flash File on smartphones offers a quick fix for software performance issues. Due to the extensive customizability of Android, soft bricks, boot loops, and latency are all possible problems. You need this guide.

Also Read
Huawei ATU-L42 Firmware (Stock ROM) Flash File
Huawei Y7 2019 DUB-LX1 EDL Firmware Unbrick Downgrade

Stock-ROM Value

Phones that are for sale come with stock operating systems (DRA-LX9 Flash File). People usually take off their smartphones’ stock software so they can add homemade ROMs and make other changes. But after changes have been made, the only way to fix problems with the system is to put it back to its original ROM.


  • Unbrick your Huawei Y5P by flashing the factory image.
  • You may upgrade and downgrade the software on the device.
  • Fix Network related issue.
  • Fix any difficulties with the device, including any lag or stuttering.

It’s important to know that making manual (stock software) changes can be risky and could cause the phone to stop working if they’re not done right. It’s best to back up all of your information and follow each step carefully.


  • This will only work with the DRA-LX9.
  • Your battery must have at least 20 percent of its life left before you can use your gadget.
  • You’ll need a good USB data cable and a desktop PC or laptop.
  • we recommend that readers create a full backup of the device’s data.
  • Download the Update Huawei Multi-Download Tool.
  • Put the USB drivers for Huawei on your PC.

Download Huawei Y5P DRA-LX9 Firmware Stock ROM

Here is a direct link to the Huawei DRA-LX9 Flash File download page. The USB driver must also be installed.

Download LinkSoftware Details
Google DriveDRA-LX9 HW EU DURA-L29A (C432E3R3P1)_FIRMWARE_05016SSE

How to Install Firmware on Huawei DRA-LX9

Follow these steps to set up your device with the original Stock software. Use the original software to reset your phone to its factory settings: Try them out.

  • First You need an SD card with at least 16GB of storage space.
  • Download the original firmware that came with your smartphone.
  • Make a new folder on your SD card, and call it dload once you give it that name.
  • After downloading the file, you will need to extract it and then enter an SD card into your device.
  • press volume up + volume down and power button then keep pressing all together.
  • Then Your phone will detect the package and will start the process automatically.
  • Be patient as the first boot might take up to five minutes to complete.
  • It is now necessary for you to do a Hard reset on your Huawei smartphone.
  • Keep pressing and holding the Volume Up button as well as the Power button until you see the Huawei logo.
  • By using the Volume buttons, Page may choose to delete all data and do a factory reset during the Hard reset.
  • and be sure to confirm by pressing the Power button.
  • The next step is to just wait till the procedure is finished completely.

I hope you were successful in installing the Huawei DRA-LX9 Firmware without causing any problems. It would be greatly appreciated if you could provide feedback in the form of a review as well as a rating for this page.

Leave a Comment