If you have dead boots, hang logos, update error problems device you may update its official firmware using the Transsion Software Download Tool, This resource is also known by its other name, “SWD AfterSales Tool.” Flashing, resetting Screen locks, and removing FRP locks are all possible with this tool.
SWD AfterSales Flashing Tool supports Qualcomm, MediaTek, and the Spredtrum/Unisoc CPU. The vast majority of Android-powered phones are supported, so yours should be too. So, let’s have a look at its features and how to put them to use. After that, we’ll additionally distribute the software’s download links.
|QFIL Flash Tool Latest Version (Update 2023) Download|
|Nokia OST Tool v6.3.7 Latest Version (Update 2023) Download|
Why Need Transsion Software Download Tool
helps you dead boots repair, update error problems, FRP Lock, Remove Screen Lock and it supports three of the chipsets that are the most popularly utilized, as was indicated before. The fact that it is compatible with Qualcomm, MediaTek, and the Spreadtrum/Unisoc chipsets significantly broadens its application area.
Download Transsion Software Download Tool Latest Version
This site provides the most recent version of the SWD AfterSales Tool, which is free to download.
Compatible: Windows 7, Windows 8, Windows 10, Windows 11 (32/64bit)
|Download Link||Software Details|
|G-Drive – Mega – MediaFire||v5.1910.29.16 [SPD]|
|G-Drive – Mega – MediaFire||v5.2009.24.14 [SPD]|
|G-Drive – Mega – MediaFire||v4.1811.23.11 [MTK]|
|G-Drive – Mega – MediaFire||v4.1901.23.17 [MTK Latest]|
Recommendation: Before any action on your device, it is highly recommended that you create a backup of all of your vital data stored on the device.
How to Use Transsion Software Download Tool on your pc
- First download and extract the SWD AfterSales Tool on your pc.
- Now, install the USB Driver on your pc.
- Download Stock ROM (scatter or .pac or .xml based) on your pc. Then, extract it.
- Unzip Transsion-Software-Download-Tool. Then, follow the following steps.
- Open SWD AfterSales.exe to Launch the Tool.
- Click on the Settings icon and locate stock firmware.
- Then, Click on Confirm button, then click to Start.
- Now Must be Power off your Mobile Device > Press and Hold Volume UP and Down > Connect your device to the computer using a good USB Cable.
- Then Once the flashing or installation process is complete, you will be able to see the Green PASS message on the Tool.
I’m hope Transsion Software Download Tool installation went smoothly. Please comment and share your ideas.